EverFocus EHN3160 Plus Quick Installation Manual page 8

d. Screw Adapter Plate between the Base Plate and Wiring Box.
Base Plate
5. Screw the Camera Case back to the Base Plate.
Camera Case
6. Insert the network / PoE cable or the additional cables through the Cable Gland. Up to three
cables can be inserted. Note that except the network / PoE cable, additional wires have to be
bundled into a cable with diameter ranging from 5.3mm to 6.4mm (see Step d below).
Screw Cap
Cable Gland
a. Remove the black Adjustment Ring if you are using a Cat 5 network cable. Note that the four
Adjustment Rings, including one black and three transparent rings, are attached on the
Cable Gland. If you are using a Cat 6 network cable, you can ignore this step. For details on
the Adjustment Rings, please refer to 3.1 Adjustment Rings in the User's Manual.
Adapter Plate
Base Plate
Adjustment Ring(s)
Wiring Box
Stopper Claw
Screw Cap
Cable Gland
7
EHN Plus Series
Stopper
Plug Screw Body