Panasonic KX-TAW848 Programming Manual page 58

2.6 Help
Q I have set the type of an extension port to "DSS Console", but I cannot apply
this setting. (Error E000402)
A • The number entered in DPT Type—Location No. (for Hybrid port) on the 2.7.4 [1-1]
Slot—Extension Port screen is the same as that entered for another DSS Console.
Change this so that the numbers do not overlap.
Q I have set the type of an extension port to "VM (DPT)", but I cannot apply this
setting. (Error E000403)
A • The DPT Type—VM Unit No. (for Hybrid port) and DPT Type—VM Port No. (for
Hybrid port) settings entered on the 2.7.4 [1-1] Slot—Extension Port screen are the
same as those entered for another VM (DPT). Change this so that the numbers do not
overlap.
Q How do I edit a Class of Service, or create a new Class of Service?
A • Class of Service feature restrictions can be set from the 2.8.11 [2-7-1] Class of
Service—COS Settings screen.
Q How do I restrict calls between 2 extensions?
A • Calls between extensions can be restricted from the 2.8.13 [2-7-3] Class of Service—
Internal Call Block screen. Click in the relevant cells to select the COS levels whose
extensions are blocked from calling each other.
Q How do I restrict CO line calls made by extensions?
A • CO line calls made by extensions can be restricted from the 2.8.12 [2-7-2] Class of
Service—External Call Block screen. Click in the relevant cells to select the trunk
groups that cannot be used by extensions associated with a particular COS in each time
mode.
To prevent extensions associated with a COS from making CO line calls, set all trunk
groups for that COS to "Block" (blue).
Q How do I modify the hold operation for SLTs?
A • It is possible to choose how to hold a line and transfer a call with an SLT using the SLT—
SLT Hold Mode option on the 2.8.17 [2-9] System Options screen.
For more details, see "1.3.2 Call Hold" of the Feature Manual.
Q How do I set up an Incoming Call Distribution (ICD) group to receive CO line
calls directly?
58 PC Programming Manual