Panasonic KX-TAW848 Programming Manual page 14

1.2 PC Programming
Notice
1.
During a long programming session, it is highly recommended that you periodically save the
system data to the SD Memory Card. If the PBX undergoes a sudden power failure or if the
system is reset for some reason, all the system data in RAM will be lost. However, if system
data has been saved to the SD Memory Card, it can be easily restored.
To save the system data to the SD Memory Card, (1) click the "SD Memory Backup" icon
before resetting the PBX or turning off the power, or (2) exit the Maintenance Console so
that the PBX automatically saves the system data.
14 PC Programming Manual
4. Enter the Installer Level Programmer Code (default:
INSTALLER).
The Programmer Code authorizes different programming
levels, and the Quick Setup is only available when you start
the KX-TAW848 Maintenance Console with the Installer
Level Programmer Code.
Note
There are 2 other Programmer Codes with limited
authorization: Administrator Level (default: ADMIN),
and User Level (default: USER). (→ 1.2.2 Password
Security)
5. a.
Click the check box to connect to the PBX. Options will
appear as shown here, on the left.
b.
Enter the system password for installer (default:
1234).
c.
Select "USB", then click [OK].
Note
To connect to the PBX via USB, the KX-TDA USB
driver must be installed on the PC, as explained above
in "Installing the Maintenance Console".
6. Follow the instructions of the Quick Setup wizard and
assign the basic items.
The program menu appears. You may now begin
programming the PBX.