Garmin GTN 625 Cockpit Reference Manual page 65

Message
REMOTE KEY STUCK-
NAV remote transfer key
is stuck.
REMOTE KEY STUCK-
TAWS inhibit key is stuck.
SELECT FREQUENCY-
Select appropriate NAV
frequency for approach.
SET COURSE-
Set course on CDI/HSI to
[current DTK].
190-01004-04 Rev. D
Description
The remote NAV
transfer (NAV RMT XFR)
key/switch has been in
a pressed position for
at least 30 seconds.
This input will now
be ignored. This input
is not available in all
installations.
The TAWS INHIBIT
discrete input has been
in a pressed position
for at least 30 seconds.
This input will now
be ignored. This input
is not available in all
installations.
Correct NAV frequency
is not set in the active
NAV frequency for the
approach procedure.
The selected course
on the CDI/HSI does
not match the current
desired track.
GTN 625/635/650 Cockpit Reference Guide (CRG)
Action
Verify the NAV RMT XFR
key/switch is not stuck.
Contact dealer for service if
this message persists.
Verify the TAWS INHIBIT key/
switch is not stuck. Contact
dealer for service if this
message persists.
Insert the correct frequency
into the active navigation
frequency window.
Set the CDI/HIS selected
course to the current desired
track.
57