Appendix B: Ping Ip Address - Planet ICA-3110 User Manual

Hd ultra-mini bullet ir ip camera
Hide thumbs Also See for ICA-3110:
Table of Contents

Advertisement

The PING (stands for Packet Internet Groper) command is used to detect whether a specific IP
address is accessible by sending a packet to the specific address and waiting for a reply. It's
also a very useful tool to confirm whether or not Internet camera installed or if the IP address
conflicts with any other device over the network.
If you want to make sure the IP address of Internet camera, utilize the PING command as
follows:
Start a DOS window.
Type ping x.x.x.x, where x.x.x.x is the IP address of the Internet camera.
The replies, as illustrated below, will provide an explanation to the problem.
If you want to detect any other device that conflicts with the IP address of Internet camera, you
also can utilize the PING command but you must disconnect the Internet camera from the
network first.
HD Ultra-mini Bullet IR IP Camera

Appendix B: PING IP Address

59
ICA-3110

Advertisement

Table of Contents
loading

Table of Contents