Electrical Connection - Fisher & Paykel IZONA OB90 Series Installation Instructions

(2,1) -1- 599790A izonacsOB90oven install A2 NZGB.indd 15/6/09 10:57:43 AM
(2,1) -1- 599790A izonacsOB90oven install A2 NZGB.indd 15/6/09 10:57:43 AM
4 UNPACK THE OVEN

ELECTRICAL CONNECTION

6
OB90 - NZ AU GB IE
220-240 V 4400 W (19.1 A)
OB90 - IT
220-240 V 3500 W (15.2 A)
Rating plate
We recommend that the outlet for the power supply cable is located in the right rear corner of
the cabinet cavity. This allows the power supply cable to sit inside the right rear of the oven and
prevents it being jammed between the cabinet wall and the rear of the oven.
Connecting the oven to the
mains power supply
Important!
This oven must be connected to the
mains power supply only by a suitably
qualified person.
This oven must be earthed.
Before connecting the oven to the
mains power supply, check that
the domestic wiring system is suitable
for the power drawn by the oven
(as specified on the rating plate)
the voltage corresponds to the value
given on the rating plate.
5 REMOVE THE DOOR
1
4
HARD WIRING THE OVEN
7
1
Unhook to
open cover
L
1
2 3
2
Unhook to open
cable clamp
E
N (L )
2