Advertisement
15
(Direct Entry)
16
(Direct Entry)
17
(Direct Entry)
18
(Press YES "r" or NO "X")
19
(Press YES "r" or NO "X")
20
(Press YES "r" or NO "X")
21
(Press YES "r" or NO "X")
10
Sensor Watch Zones (New Program Only)
•
Enter the zone numbers of zones to be Sensor Watch zones.
•
Valid entries are from 01 to 32. Directly enter each zone number, including leading zeros.
u
•
Press
to save and then repeat for any additional zone(s), press NEXT ("r" or
NOTE: A Sensor Watch Time of 24 hours will automatically be programmed.
Keypad Sounder On Alarm Zones (New Program Only)
•
Enter the zone numbers of all zones to activate the Keypad Sounder upon alarm.
•
Valid entries are from 01 to 32. Directly enter each zone number, including leading zeros.
u
•
Press
to save and then repeat for any additional zone(s), press NEXT ("r" or
Auto Bypass Re-entry Zones (New Program Only)
•
Enter the zone numbers of zones to be Auto Bypass Re-entry zones.
•
Valid entries are from 01 to 32. Directly enter each zone number, including leading zeros.
u
•
Press
to save and then repeat for any additional zone(s), press NEXT ("r" or
•
Auto Bypass Re-entry Zones allow the system to be armed with the zone faulted but come back
into the system (armed) when the zone is subsequently closed.
Enable No EOLR Zones (New Program Only)
•
Press NEXT ("r" or
p
Resistor. Press the PRIOR/NO button to continue.
Enable Telco Line Fault Test?
•
Press NEXT ("r" or
p
•
Press the PRIOR/NO button to continue.
NOTE: There is a preset 60 second Telco Line Fault Test Delay.
Enable Burg Output Chirp on KeyFob?
•
Press NEXT ("r" or
p
•
Press the PRIOR/NO button to continue.
NOTE: The Burg Output will chirp once on Keyfob Arm and twice on Keyfob Disarm.
Enable SIA CP-01?
•
Press NEXT ("r" or
p
•
Press the PRIOR/NO button to continue.
The SIA CP-01 Features are designed to reduce the incidence of false alarms. NOTE: Do not
enable unless reporting, otherwise system trouble Fail to Communicate may occur.
) to program all zones except 24 Hr & fire zones for No End Of Line
) to enable Telco Line Fault Test.
) to enable Burg Output Chirp on KeyFob Arm / Disarm.
) to enable.
) to proceed.
p
p
) to proceed.
p
) to proceed.
Advertisement
