Speed Dial; Assign A Speed Dial Number; Assign Your Speed Dial Voicemail Number; Make A Call Using Speed Dial - AT&T CL81101 Abridged User Manual

Directory

Speed dial

The telephone system has 10 speed dial locations (2-9 and 0, location
reserved for voicemail) where you can store the telephone numbers you wish
to dial more quickly. You can store up to 30 digits in each location. Speed dial
assignments can only be selected from the existing directory entries, with the
exception of
locations except for
hand corner of the entry.

Assign a speed dial number

When the telephone is idle, press MENU
1.
2. Press SELECT to select >Directory.
MENU/
Press q or p
3.
CID
4. Press q or p
CID
then press
MENU
then enters your directory list.
5. Press q or p
CID
selected speed dial location.
6. Press /SELECT to save the setting and return to the previous menu.
MENU

Assign your speed dial voicemail number

See the Set speed dial voicemail number section on page 8 for instructions
on assigning your speed dial voicemail number.

Make a call using speed dial

When in idle mode, press and hold the dialing key (2-9, 0) corresponding to the
assigned location you wish to call.

Check your voicemail using speed dial

Press and hold the
1, which must be manually entered. In the directory, speed dial
1 are indicated by their number in the bottom right
to scroll to >Speed dial. Press
DIR
to choose your desired speed dial location (0 or 2-9),
DIR
/SELECT. The screen briefly shows Copy from Directory...
to scroll to the phone number you wish to assign to the
DIR
1 key on your handset to dial your voicemail number.
.
/SELECT
MENU/
22
1 is
SELECT.