AT&T CL81101 Abridged User Manual page 33

Dect 6.0 cordless telephone with caller id/call waiting
Hide thumbs Also See for CL81101:
Table of Contents

Advertisement

Appendix
Troubleshooting
Eliminate any background noise. Noise from a television, radio or other appliances
might cause the phone to not dial out properly. If you cannot eliminate the
background noise, first try muting the cordless handset before dialing, or dialing from
another room with less background noise.
If other phones in your home are having the same problem, contact your telephone
service provider (charges might apply).
My cordless handset isn't performing normally.
Make sure you plug the power cord securely into the telephone base. Plug the power
adapter into a different, working electrical outlet without a wall switch.
Move the cordless handset closer to the telephone base. You might have moved out
of range.
Reset the telephone base. Unplug the electrical power. Wait for 15 seconds then plug it
back in. Allow up to one minute for the cordless handset and telephone base to reset.
Other electronic products such as HAM radios and other DECT phones can cause
interference with your cordless phone. Try installing your phone as far away as
possible from these types of electronic devices.
The batteries do not hold a charge.
Charge the battery in the cordless handset for at least 10 hours. For optimum daily
performance, return the cordless handset to the telephone base or charger when not in use.
If the battery is depleted, it might take approximately 30 minutes to charge the
handset before it shows Low battery. Refer to the table on page 4 for details.
You might need to purchase a new battery. Please refer to Battery installation and
charging in this user's manual on page 4.
I get noise, static, or weak signals even when I'm near the telephone base.
If you subscribe to high-speed Internet service (DSL - digital subscriber line) through
your telephone line, you must install a DSL filter between the telephone line cord and
the telephone wall jack (see page 3). The filter prevents noise and caller ID problems
as a result of DSL interference. Please contact your DSL service provider for more
information about DSL filters.
You may be able to improve the performance of your cordless phone by installing
your new telephone base as far as possible from any other existing cordless
telephone system that may already be installed.
28

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cl81201Cl81211Cl81301

Table of Contents