Semiauto Clock Set; Manual Clock Set - JVC LPT0641-001A Instructions Manual

Semiauto Clock Set

You can change the host channel/D.S.T. (Daylight Saving Time)/
time zone setting manually. First follow steps 1 to 4 in
"Preparations" ( pg. 16), then go to the following steps.
NOTE:
The time set previously will be erased when "AUTO CLOCK",
"HOST CH", "D.S.T." or "TIME ZONE" setting is changed.
A
Set "Auto Clock" to "ON".
Press OK or repeatedly to
e
move the highlight bar to
"AUTO CLOCK", then press
so that "ON" is selected.
rt
B
Select the host channel.
You can either select "AUTO" or enter a PBS channel
number.
Press OK or to move the highlight bar to "HOST CH",
e
then press repeatedly until "AUTO" or the desired
rt
PBS channel number is selected.
NOTE:
Some PBS channels do not transmit clock setting data.
C
Select the D.S.T. mode.
Press OK or to move the highlight bar to "D.S.T.", then
e
press repeatedly until the desired setting is selected.
rt
AUTO: Select if you want to adjust your VCR's clock
automatically by the incoming signal from the
host channel. Be sure to select the correct time
zone manually in step 4.
ON: Adjustment will be made by the built-in clock
itself.
OFF: Select when Daylight Saving Time does not apply
to you.
D
Select the time zone.
Press OK or to move the highlight bar to "TIME
e
ZONE", then press
rt
desired time zone is selected. Each time you press the
button, the time zone changes as follows:
AUTO ATLANTIC
{ { {
MOUNTAIN PACIFIC
{ {
(back to the beginning)
{
NOTE:
If an incorrect time is displayed by the Plug & Play function, you
may be receiving the clock setting data of a PBS channel from an
adjacent time zone or from an incorrect PBS channel from a
cable TV system. If you selected "AUTO" for the host channel in
step 2, be sure to select the correct time zone manually.
repeatedly until "AUTO" or the
EASTERN CENTRAL
{
ALASKA HAWAII
{ {
E
Complete the Semiauto Clock Set.
Press MENU to return to normal screen.
IMPORTANT
Turn off the VCR after performing Semiauto Clock. "Auto"
will appear on the display panel while the clock is being set.
The current clock time will appear automatically when the
clock setting is complete.
AUTO DAYLIGHT SAVING TIME
This function enables automatic adjustment of the VCR's
clock at the start and end of Daylight Saving Time.
With Auto DST activated, . . .
. . . on the first Sunday of April at 2:00 AM, the clock is
adjusted to 3:00 AM.
. . . on the last Sunday of October at 2:00 AM, the clock is
adjusted to 1:00 AM.

Manual Clock Set

First follow steps 1 to 4 in "Preparations" (
the following steps.
A
Set time, date and year.
Press until the desired
rt
time appears, then press OK
or . Set the date and year in
e
the same way.
Holding changes the time
rt
in 30-minute intervals, or
changes the date in 15-day
intervals.
B
Select D.S.T. mode.
Press OK or to move the
e
highlight bar to "D.S.T.", then
press to select the
rt
desired setting.
ON: Adjustment will be
made by the built-in
clock itself.
OFF: Select when Daylight
Saving Time does not
apply to you.
C
Start clock.
Press MENU and normal screen appears.
To make corrections any time during the process
Press OK or repeatedly until the item you want to
e
change blinks, then press
EN
pg. 16), then go to
.
rt
17