Table of Contents
Advertisement
VHS MODE SET (cont.)
VIDEO CALIBRATION
8
ON
OFF
PICTURE CONTROL
8
AUTO
EDIT
SOFT
SHARP
FRONT AUX INPUT
8
VIDEO
S-VIDEO
When this function is set to "ON", this VCR checks the condition of the tape in use
during playback and recording, and compensates to provide the highest-possible
pictures. This takes place whenever you play back a tape or start recording after
inserting a tape. (
pg. 35)
This feature helps you to adjust the playback picture quality according to your
preference. Normally select "AUTO".
AUTO:
Provides the optimized picture benefits of the VIDEO
CALIBRATION Picture System.
EDIT:
Minimizes picture degradation during editing (recording and
playback).
SOFT:
Reduces image coarseness when viewing overplayed tapes
containing a lot of noise.
SHARP:
Clearer, sharper-edged picture when viewing images with lots of
flat, same-coloured surfaces such as cartoons.
NOTES:
When you select "EDIT", "SOFT" or "SHARP", the selected mode will not change until you
select another mode.
When you select "EDIT" to dub tapes, be sure to select "AUTO" after you finish dubbing
the tapes.
When "VIDEO CALIBRATION" is "OFF", "PICTURE CONTROL" switches automatically
from "AUTO" to "NORM".
Select the appropriate mode depending on the connector being used on the front
panel.
VIDEO:
To use the VIDEO input connector on the front panel.
S-VIDEO:
To use the S-VIDEO input connector on the front panel.
* The default setting is bold in the table below.
73
EN
Advertisement
Table of Contents
