Repeat Playback; Index Search; Next Function Memory - JVC LPT0641-001A Instructions Manual

Mini dv/s-vhs video cassette recorder
Table of Contents

Advertisement

30
EN
1
4
7
1

Repeat Playback

Your VCR can automatically play back the whole tape 100 times
repeatedly.
1
Start playback.
Press PLAY (
).
4
2
Activate Repeat Playback.
Press PLAY (
) and hold for over 5 seconds, then release.
4
The Play indicator (
) on the front display panel blinks
u
slowly.
After playing back a tape 100 times, the VCR stops
automatically.
3
Stop Repeat Playback.
Press STOP (
) at any time.
8
Pressing PLAY (
), REW (
4
stops Repeat Playback.
1
3
2
T
W
2
3
2
5
6
8
9
0
4
DV
S-VHS
), FF (
) or PAUSE (
3
5
PLAYBACK/RECORDING ON VHS DECK (cont.)

Index Search

Your VCR automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
NOTE:
Before starting, make sure the VCR
is in the Stop mode.
Activate Index Search.
Press
or
w
e
displayed on the TV screen and search begins in the
corresponding direction.
To access index codes 2 through 9, press
until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press
twice.
To locate the beginning of D from the current position, press
once.
When the specified index code is located, playback begins
automatically.

Next Function Memory

The Next Function Memory "tells" the VCR what to do after
rewinding. Before continuing, make sure the VCR is in the Stop
mode.
a- For Automatic Start Of Playback
Press REW (
2 seconds.
b- For Automatic Power Off
Press REW (
2 seconds.
c- For Automatic Cassette Ejection After Tape Rewind
Press REW (
2 seconds.
NOTE:
The Automatic Power Off does not work if "AUTO TIMER" is set
to "ON" (
made. If "AUTO TIMER" is set to "ON", the VCR directly goes
into the Timer-Standby mode at the same time when the POWER
is pressed for the Automatic Power Off.
) also
9
(
or
). "INDEX -1" or "INDEX 1" is
2
6
Current position
), then press PLAY (
3
), then press POWER within
3
), then press EJECT ( ) within
3
pg. 71) and if any timer programing has been
INDEX 1
or
repeatedly
w
e
w
e
Index number
) within
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hr-dvs3u

Table of Contents