Setting Clock Semiautomatically; Semiauto Clock Set - JVC SR-VD400U Instructions Manual

Setting clock semiautomatically

— Semiauto Clock Set

You can change the host channel/D.S.T. /time zone
setting manually.
First follow steps 1 to 2 on page 10, then go to the
following steps.
3
Access Auto Clock Set screen
Press %fi to move
the arrow to "AUTO
CLOCK SET", then
press OK.
Then;
To select the host channel — go to step 4.
To select the D.S.T. mode — go to step 5.
To select the time zone — go to step 6.
NOTE:
The time set previously will be erased when "AUTO
CLOCK SET" is selected.
4
Select host channel
You can either select
"AUTO" or enter a
PBS channel number.
Press %fi to move
the arrow to "HOST
CH", then press @ #
until "AUTO" or the
desired PBS channel
number is selected.
NOTE:
Some PBS channels do not transmit clock setting data.
* Auto Daylight Saving Time
This function enables automatic adjustment of the VCR's
clock at the start and end of Daylight Saving Time.
With Auto DST activated, . . .
. . . on the first Sunday of April at 2:00 AM, the clock is
adjusted to 3:00 AM.
. . . on the last Sunday of October at 2:00 AM, the clock is
adjusted to 1:00 AM.
FUNCTION SET UP TUNER SET UP INITIAL SET UP
CLOCK SET GUIDE CHANNEL OTHER
AUTO CLOCK SET
MANUAL CLOCK SET
AUTO CLOCK ON
OK
MENU
SELECT WITH ARROW KEYS
THEN PRESS [OK]
SELECT
EXIT
FUNCTION SET UP TUNER SET UP INITIAL SET UP
AUTO CLOCK SET TIME – –:– – AM DATE 1/1 (WED) 2003
AUTO
HOST CH [TV]
D.S.T AUTO
AUTO
TIME ZONE
RETURN
OK
MENU
SELECT WITH ARROW KEYS
THEN PRESS [OK]
SELECT
EXIT
5
Select D.S.T. mode
You have three choices:
AUTO– Select if you want to adjust your VCR's
clock automatically by the incoming
signal from the host channel. (Auto
Daylight Saving Time*)
ON– Adjustment will be made by the built-in
clock itself.
OFF– Select when Daylight Saving Time does
not apply to you.
Press %fi to move the arrow to "D.S.T.", then
press @ # repeatedly until the desired setting is
selected.
6
Select time zone
You can select the time zone automatically or
manually.
Press %fi to move the arrow to "TIME ZONE",
press @ # repeatedly until "AUTO" or the desired
time zone is selected.
Each time you press the button, the time zone
changes as follows:
O AUTO O ATLANTIC O EASTERN
O CENTRAL O MOUNTAIN O PACIFIC
O ALASKA O HAWAII O (back to the beginning)
NOTE:
If an incorrect clock time is displayed by the Plug &
Play setting, you may be receiving the clock setting
data of a PBS channel from an adjacent time zone or
from an incorrect PBS channel from a cable TV system.
If you selected "AUTO" for the host channel in step
be sure to select the correct time zone manually.
7
Return to normal screen
Press MENU.
IMPORTANT
Turn off the VCR after performing Semiauto Clock Set.
"Auto" will appear on the front display panel while the
clock is being set. The current clock time will appear
automatically when the clock setting is complete.
11
EN
4
,