Initial Settings; Clock Setting; Semiauto Clock Set - JVC SR-V101US Instructions Manual

Initial Settings

Clock Setting

Turn on the VCR and TV, and select the VCR channel (or AV
mode).
Perform clock setting only if the clock has not been set correctly
by the Plug&Play setting.
Preparations
A
Access Main Menu screen, then Initial
Set screen
Press MENU on the Remote. Press
SHUTTLE PLUS rt
to move the
highlight bar (arrow) to "INITIAL SET",
SHUTTLE PLUS e
then press OK or
B
Access Clock Set screen
SHUTTLE PLUS rt
Press
highlight bar (arrow) to "CLOCK SET",
SHUTTLE PLUS e
then press OK or
Setting clock semiautomatically

— Semiauto Clock Set

You can change the host channel/D.S.T. (Daylight Saving Time)/
time zone setting manually. First follow steps 1 to 2 in
"Preparations" above, then go to the following steps.
C
Set Auto Clock to ON
SHUTTLE PLUS e
Press OK or
Remote repeatedly to move the highlight
bar to "AUTO CLOCK", then press
SHUTTLE PLUS so that "ON" is
rt
selected.
● The time set previously will be erased
when "AUTO CLOCK", "HOST CH", "D.S.T." or "TIME ZONE"
setting is changed.
D
Select host channel
You can either select "AUTO" or enter a PBS channel number.
SHUTTLE PLUS e
Press OK or
SHUTTLE PLUS rt
"HOST CH", then press
"AUTO" or the desired PBS channel number is selected.
● Some PBS channels do not transmit clock setting data.
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
.
INITIAL SET
to move the
CLOCK SET
GUIDE CHANNEL SET
.
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
CLOCK SET
on the
TIME DATE
– –:– – AM 1/ 1
AUTO CLOCK : ON
HOST CH : AUTO
D.S.T. : AUTO
TIME ZONE : AUTO
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
to move the highlight bar to
repeatedly until
E
Select D.S.T. mode
SHUTTLE PLUS e
Press OK or
"D.S.T.", then press
desired setting is selected.
AUTO: Select if you want to adjust your VCR's clock
automatically by the incoming signal from the host
channel. (Auto Daylight Saving Time enables automatic
adjustment of the VCR's clock at the start and end of
Daylight Saving Time.) Be sure to select the correct time
zone manually in step 6.
ON: Adjustment will be made by the built-in clock itself.
OFF: Select when Daylight Saving Time does not apply to you.
F
Select time zone
SHUTTLE PLUS e
Press OK or
"TIME ZONE", then press
"AUTO" or the desired time zone is selected. Each time you press
the button, the time zone changes as follows:
AUTO ATLANTIC
{ {
MOUNTAIN
{ {
(back to the beginning)
{
G
Complete Semiauto Clock Set
Press MENU to return to normal screen.
IMPORTANT
Turn off the VCR. "Auto" will appear on the display panel while
the clock is being set. The current clock time will appear
automatically when the clock setting is complete.
Setting clock manually
— Manual Clock Set
First follow steps 1 to 2 in "Preparations" previously described,
then go to the following steps.
C
Set time, date and year
SHUTTLE PLUS rt
Press
desired time appears, then press OK or
SHUTTLE PLUS e
in the same way.
● Holding
SHUTTLE PLUS rt
the time in 30-minute intervals, or
changes the date in 15-day intervals.
D
Select D.S.T. mode
SHUTTLE PLUS e
Press OK or
the highlight bar to "D.S.T.", then press
SHUTTLE PLUS rt
setting.
YEAR
04
ON: Adjustment will be made by the
built-in clock itself.
(CATV)
OFF: Select when Daylight Saving Time does not apply to you.
E
Start clock
Press MENU and normal screen appears.
To make corrections any time during the process
SHUTTLE PLUS e
Press OK or
want to change blinks, then press
— 8 —
to move the highlight bar to
SHUTTLE PLUS rt
repeatedly until the
to move the highlight bar to
SHUTTLE PLUS rt
EASTERN CENTRAL
{ {
PACIFIC ALASKA HAWAII
{ {
until the
. Set the date and year
changes
to move
to select the desired
repeatedly until the item you
SHUTTLE PLUS rt
repeatedly until
.