Ethernet Teaming Messages - IBM IntelliStation M Pro User Manual

Table 6. NDIS (Windows NT or Windows 2000) driver messages for the Ethernet controller (continued)
Error code (hex) Description
0x17 Explanation: Slot parameter not specified in the registry.
Action: Call for service.
All other Action: Call for service.
4-character
hexadecimal
codes

Ethernet teaming messages

This section displays the messages associated with Ethernet teaming.
Table 7. NDIS (Windows NT or Windows 2000) driver teaming messages for the Ethernet controller
Event ID Type
01 Error
02 Error
03 Error
04 Error
05 Error
06 Informational
07 Informational
08 Informational
09 Informational
10 Warning
11 Informational
68
IntelliStation M Pro: User Guide
Description
Explanation: Team Name and physical adapter name are the same. This
is an invalid configuration.
Action: Reconfigure the adapter team by double-clicking the PROSet icon
in the control panel.
Explanation: Unable to allocate required resources.
Action: Free some memory resources and restart.
Explanation: Unable to read required registry parameters.
Action: Reconfigure the adapter team by double-clicking the PROSet icon
in the control panel.
Explanation: Unable to bind to physical adapter.
Action: Reconfigure the adapter team by double-clicking the PROSet icon
in the control panel.
Explanation: Unable to initialize an adapter team.
Action: Reconfigure the adapter team by double-clicking the PROSet icon
in the control panel.
Explanation: Team nn. Primary adapter is initialized.
Action: None.
Explanation: Team nn. Secondary adapter is initialized.
Action: None.
Explanation: Team nn. Virtual adapter or Team is initialized.
Action: None.
Explanation: Team nn. Primary adapter is switching over.
Action: None.
Explanation: Team nn. Adapter link down.
Action: Make sure the adapter is functioning properly.
Explanation: Team nn. Secondary adapter took over.
Action: None.