IBM IntelliStation M Pro User Manual page 68

Code Function
015 USB interface
020 PCI interface
030 SCSI interface
175 System thermal
180 Status display
201 System memory
206 Diskette drive
215 CD-ROM
217 Hard disk drive
56
IntelliStation M Pro: User Guide
Result Text message
Aborted Can NOT test USB interface while it is in use.
Note: If you have a USB keyboard or mouse
attached, you cannot run the diagnostic program
for the USB interface.
Failed System board
Failed System board
Failed SCSI adapter in slot n failed register/counter/
power test
(where n is the slot number of the failing adapter)
SCSI controller on system board failed
register/counter/power test
Failed Fan # n
(where n is the number of the failing fan)
Temperature sensed on processor board is out of
range
Failed Any failure message
Failed RIMM is in location RIMM n
(where n is the number of the socket that contains
the failing RIMM)
Test setup error: Corrupt BIOS in ROM
Test setup error: Corrupt DMI BIOS, information
in BIOS is not as expected
Failed Internal diskette drive bay
Failed On system board.
Aborted The CD-ROM drive is not present.
Failed BIOS drive # n (where n is the drive bay number)
Action
1. Turn off the
computer.
2. Replace the USB
keyboard and
mouse with a
standard keyboard
and mouse.
3. Turn on the
computer.
4. Run the diagnostic
test again.
Call for service.
Call for service.
Refer to the information
provided with the
adapter for instructions.
If the problem persists,
call for service.
Call for service.
Replace the indicated
fan.
Call for service.
Call for service.
1. Reseat the failing
RIMM.
2. If the problem
remains, replace the
RIMM.
If the problem
persists, call for
service.
If your computer does
not have the latest level
BIOS installed, update
the BIOS to the latest
level.
If the problem persists,
call for service.
Call for service.
Call for service.
Verify that the cables
are properly connected
to the CD-ROM drive.
If the problem persists,
call for service.
Call for service.