Installing The Input Panel - Harman Kardon MaestroKitchen 100 Installation Manual

Installing the Input Panel

1. Drill a 68mm diameter mounting opening into the back wall of the kitchen cabinet.
2. Assemble the cables to the input panel as shown in the illustration.
1. Remove retainer from jack.
3. Replace retainer on jack.
4. Attach USB cables to panel.
8
Drill 68mm mounting
opening.
2. Insert jack through input panel.
5. Completed input panel.
3. Run the two USB cables and the stereo mini cable through the mounting opening to the head-
unit location. NOTE: You may need to drill holes for the cables in the kitchen directly behind
the head-unit mounting location.
Run cables behind
and on top of
kitchen cabinets.
Harman Kardon
MaestroKitchen
Head Unit.
4. Using a manual screwdriver (do NOT use an electric screwdriver for this step), use the supplied
screws to attach the input panel to the back wall of the cabinet. Then press the input panel
screw caps over the exposed attachment screws.
Supplied Screws
Installation
Input Panel
Mounting Opening
Attach Screw Caps.