Optional System Testing Steps; Install The Toe-Kick - Harman Kardon MaestroKitchen 100 Installation Manual

Optional System Testing Steps

If you wish, you can use the following steps to test all of the system's input connections:
1. Connect an iPod or USB stick containing music files to one of the USB ports on the input panel. Touch the Home icon, then touch the Down icon so that "iPod" or "USB" (whichever you connected to the
input panel) appears on the information screen. Touch the OK icon to change to the new input. The front panel will configure for operation of the iPod or USB input.
2. Use the Up/Down icon to select a song, then touch the OK icon to play it. Confirm that music plays through the connection, then repeat steps 1 – 2 for the other USB connection.
3. If the iPod is still plugged into the USB port on the input panel, unplug it and use a stereo 3.5mm cable to connect the iPod headphone output to the Aux input on the input panel.
4. Touch the Home icon, then touch the Down icon so that "Aux" appears on the information screen and touch the OK icon to select it.
5. Play music on the iPod and confirm that music plays through the connection.

Install the Toe-Kick

Once the entire system has been installed and tested, install the toe-kick in the kitchen. Make sure to install a toe-kick grille in front of the subwoofer.
16
Next/Previous Play/Pause
Next/Previous Play/Pause
Icon Icon
Icons Icon
Front-panel configuration for USB operation. Configuration for iPod operation is identical except for the title on the Information Screen
Information Home Up/Down
Information Home Up/Down
Screen Icon Icons
Screen Icon Icon
OK Left/Right Icon
OK Left/Right
Icon
Icon Icons
Installation
Options
Options
Icon
Icon