Basic Connections - JVC HR-V510E Instructions Manual

Basic Connections

A
Check contents
Make sure the package contains all of the accessories listed in
"Specifications" ( 16).
B
Situate recorder
Place the recorder on a stable, horizontal surface.
C
Connect recorder to TV
Aerial connector
Back of TV
21-pin SCART
connector
21-pin SCART cable
(not provided)
Mains power cord
Back of recorder
Mains outlet
TV aerial cable
RF cable
(provided)
ANT. IN
L-1 IN/OUT RF OUT
RF Connection
A Disconnect the TV aerial cable from the TV.
B Connect the TV aerial cable to the ANT. IN connector on the
rear of the recorder.
C Connect the provided RF cable between the RF OUT
connector on the rear of the recorder and the TV's aerial
connector.
AV Connection
If your TV is equipped with a 21-pin SCART connector, perform
AV connection to improve picture quality during tape playback.
A Connect the aerial, recorder and TV as shown in the
illustration.
B Connect an optional 21-pin SCART cable between the L-1 IN/
OUT connector on the rear of the recorder and the TV's 21-pin
SCART connector.
D
Connect recorder to mains
Plug the mains power cord into a mains outlet.
— 4 —