Customising The Buttons - Panasonic KX-TDA15 User Manual

3.1.3 Customising the Buttons

You can customise the flexible buttons and/or programmable feature (PF) buttons on PTs, Add-on Key
Modules, and PSs. They can then be used to make or receive outside calls or as feature buttons.
•
To enter the programming mode when using a PS, refer to "Operating Instructions" for PS.
•
The buttons in the table below can only be set on certain flexible buttons, as follows:
–
–
–
To enter the programming mode
PROGRAM
OR
PAUSE
Press PROGRAM
or PAUSE.
Button
Loop-CO (L-CO)
Group-CO (G-CO)
Single-CO (S-CO)
Direct Station Selection (DSS)
One-touch Dialling
Incoming Call Distribution Group (ICD
Group)
Message
Message for Another Extension
Call Forwarding (FWD)/Do Not Dis-
turb (DND)—Both calls
FWD/DND—Outside calls
FWD/DND—Intercom calls
Group FWD—Both calls
Group FWD—Outside calls
Flexible buttons on PTs/Add-on Key Modules/PSs: all buttons can be set.
Flexible buttons on DSS Consoles: all buttons except CTI buttons can be set.
Programmable feature (PF) buttons: only the One-touch Dialling button can be set.
Press desired
flexible button.
*1
sion no.
To programme
To continue
programming
input
Follow
Press ENTER
programming input.
or STORE.
Programming Input
# + Outside line group no. (2 digits)
0 + Outside line no. (3 digits)
1 + Extension no.
2
+ Desired no. (max. 32 digits)
*²
3 0 + Incoming call distribution group extension no. (+
# + delayed ringing time [0–7])
4 0
4 0 + Extension no./Incoming call distribution group exten-
4 1
4 2
4 3
4 4 + Incoming call distribution group extension no.
4 5 + Incoming call distribution group extension no.
3.1.3 Customising the Buttons
To exit
PROGRAM
OR
OR
PAUSE
AUTO DIAL
STORE
Press PROGRAM
or PAUSE.
User Manual 187