Customising The Buttons - Panasonic KX-TDE100 User Manual

3.1.3

Customising the Buttons

You can customise the flexible buttons and/or programmable feature (PF) buttons on PTs, Add-on Key
Modules, and PSs. They can then be used to make or receive outside calls or as feature buttons.
• To enter the programming mode when using a PS, refer to "Operating Instructions" for PS.
• The buttons in the table below can only be set on certain flexible buttons, as follows:
–
–
–
To enter the programming mode
PROGRAM
OR
PAUSE
Press PROGRAM
or PAUSE.
Button
Loop-CO (L-CO)
Group-CO (G-CO)
Single-CO (S-CO)
Direct Station Selection (DSS)
One-touch Dialling*
Incoming Call Distribution Group (ICD
Group)
Message
Message for Another Extension
Call Forwarding (FWD)/Do Not
Disturb (DND)—Both calls
FWD/DND—Outside calls
FWD/DND—Intercom calls
Flexible buttons on PTs/Add-on Key Modules/PSs: all buttons can be set.
Flexible buttons on DSS Consoles: all buttons except CTI and Primary Directory Number
(PDN) buttons can be set.
Programmable feature (PF) buttons: only the One-touch Dialling button can be set.
Press desired
flexible button.
#
0
1
1
3
+ delayed ringing time [0–7])*
4
4
extension no.
4
4
4
3.1 Customising Your Phone (Personal Programming)
To programme
To continue
programming
input
Follow
programming input.
Programming Input
+ Outside line group no. (2 digits)
+ Outside line no. (3 digits)
+ Extension no.
*²
2
+ Desired no. (max. 32 digits)
0
+ Incoming call distribution group extension no. (+
0
0
+ Extension no./Incoming call distribution group
1
2
3
To exit
PROGRAM
OR
AUTO DIAL
STORE
Press PROGRAM
Press ENTER
or PAUSE.
or STORE.
3
OR
PAUSE
#
User Manual 207