Rear Anti Tippers; Transit Kit - Invacare Zipper 2 User Manual

15
16
47

Rear Anti Tippers

(Photograph 22)
The anti-tippers help prevent you from tipping over when the rear wheels are
incorrectly positioned, or when the user or attendant mishandles the
wheelchair.
Use: The anti-tippers fit into the rear tubes of the side frames (A). Fit the
anti-tippers into the side frame rear tube, until the button springs are
positioned in the holes of the rear tube (A). Carry out these operations in
the reverse order to remove. You can leave the anti-tip casters on the
wheelchair even if you do not wish to use them. Just depress the button
spring and rotate the entire anti-tipper unit a half turn. (180°).
Note: The anti-tippers are not to be used as tipping levers.

Transit Kit

(Photos 23 and 24)
The transit kit includes a manual brake for operation by an attendant.
Note: - This brake is different to the self propelled version.
Also included is a choice of either pneumatic or solid tyre wheels.
Adjustment: It may be necessary to adjust the brakes after repairing a
puncture or because of wear on the pneumatic or solid tyre. Slacken
clamp screws (B) and adjust the brake assembly to achieve adequate
braking. Tighten the clamp screws (B) firmly after adjustment.