Backrest Extension - Invacare Zipper 2 User Manual

14

Backrest Extension

(Photograph 21)
The backrest extension has two uprights (B) and backrest
extension upholstery. The locating pegs should only be fitted to
the push handles of the backrest by a qualified technician.
When refitting, make sure that it is firmly fixed onto the
locations fitted to the backrest tubes. Raise the head rest
assembly to remove it from the tubes of the recliner backrest.
Adjustment: No adjustment is required for this extension.
However, it can be removed for transport.
Fitting Instructions - Backrest Extension For Vehicle Transport
When transporting the chair the backrest extension
must be secured to the push handles.
Using a M5 x 30mm Hex Hd screw and location ring
(See photo)
Slide the location ring inside the slot on the extension
tube, and then feed the Hex Hd screw through the
tube and location ring and firmly secure to the push
handle.
46