Elevating Legrests - Invacare Zipper 2 User Manual

To remove the support, carry out the same operation as for
swing back and lift the support upwards. To refit it, offer the
support in the open position, align the holes (B) on the pivots
(C) and press down. Rotate the support to the locked position.
Adjustment: The footrest supports cannot be adjusted.
Note: The footrest supports are fitted in pairs to the
wheelchair. When adjusting or removing, remember that there
is one support for the right hand side and another for the left
hand side.

Elevating Legrests

(Photographs 17 and 18)
The leg rests shown are leg rest supports with an integral pad
for supporting the lower leg. The leg rests can be swung away
and removed.
Use: the operations for swing away and removing are the same
as for the footrest supports.
Adjustment: To adjust the angle of the leg rest, lift it upwards
to the angle required. To lower the leg rest, hold the leg in one
hand and operate the release lever (A) with the other hand.
Lower to the required position.
The calf support pad can be pivoted when folding the
wheelchair. The position can also be set on the mounting tube
in one of three locations .It can also be set along the mounting
tube by sliding into the chosen location (18).
43