Electronic Vehicle Information Center (Evic); Programmable Features - Dodge 2014 Ram 1500 User Manual

ELECTRONIC VEHICLE INFORMATION CENTER (EVIC)

• The EVIC features a driver interactive
display that is located in the instrument
cluster. Pressing the controls on the left
side of the steering wheel allows the
driver to select vehicle information and
Personal Settings. For additional infor-
mation, refer to Programmable Features
in this guide.
• Press and release the UP
to scroll upward through the main
menus (Fuel Economy, Vehicle Info,
Tire PSI, Cruise, Messages, Trip Info,
Vehicle Speed and Turn Menu Off) and sub menus.
• Press and release the DOWN
menus and sub menus.
• Press and release the RIGHT
select a personal setting in the setup menu. Press and hold the RIGHT
two seconds to reset features.
• Press the BACK/LEFT
Compass Calibration
• This compass is self-calibrating, which eliminates the need to set the compass
manually. When the vehicle is new, the compass may appear erratic and the EVIC
will display "CAL" until the compass is calibrated.
• You may also calibrate the compass by completing one or more 360 degree turns
(in an area free from large metal or metallic objects) until the "CAL" message
displayed in the EVIC turns off. The compass will now function normally.

PROGRAMMABLE FEATURES

Programmable Features
• The EVIC can be used to view or change the following settings. Press the UP
DOWN button until System Setup displays, then press the RIGHT
Scroll through the settings using the UP or DOWN buttons. Press the RIGHT
button to change the setting. Press the BACK/LEFT
previous menu or sub menu.
• Radio Info
• Fuel Economy Info
• Cruise Control Info
• Digital Vehicle Speed
• Stop/Start
• Screen Setup
button
button to scroll downward through the main
button for access to main menus, sub menus or to
button to scroll back to a previous menu or sub menu.
• Trip Info
• Tire Pressure
• Vehicle Info
• Stored Warning Messages
• Turn Menu OFF
ELECTRONICS
button for
button to scroll back to a
or
button.
117