TYAN Thunder K8SR User Manual page 7

J87
J85
J92
J111
J86
J77 INTR – Chassis Intrusion Header
Active Low this header connects ADT7463 pin76
©© PIN1: Case Open PIN2: GND
J85 ATI Video disable
©©
Open – (Default) Enable onboard video
©©
Closed – Disable onboard video
13
WWW.TYAN.COM
J77
J102
J86 Front Panel Header
©©
1 ¾
HDDLED+
©©
©©
HDDLED- 3 ¾
©©
Reset SW 5¾
©©
Reset SW 7¾
©©
+5V
9¾
©£
©©
InfraRed Rx
11¾
©©
GND 13¾
InfraRed Tx 15¾
CH INTRU#
17¾
J87 Gigabit Ethernet Disable
©©
Open – (Default) Enable onboard Gigabit Ethernet
©©
Closed – Disable onboard Gigabit Ethernet
J92 PCI-X Slot 2 Bus Speed Override
©©
Open – (Default) Allows PCI-X slot 2 to operate at up to 100MHz
©©
Closed – Force PCI-X slot 2 to operate in at a maximum 66MHz
Note: This jumper affects integrated Ethernet and SCSI on the
same bus
J102 SATA (Serial ATA) Controller Disable
©©
Open – (Default) Enable onboard SATA Controller
©©
Closed – Disable onboard SATA Controller
J111 SCSI Controller Disable (optional)
©©
Open – (Default) Enable onboard SCSI Controller
©©
Closed – Disable onboard SCSI Controller
OEM Reserved Connectors and Jumpers
DO NOT MODIFY THESE JUMPERS
The pin definition of these headers are not available
J103 RSVD
J104 RSVD
J110 RSVD
J89 GPIO
J90 GPIO
WWW.TYAN.COM
PWR LED
¾2
(green)
¾4 SLP LED (yellow)
¾6
PWR SW
¾8
PWR SW
¾10 SLEEP SW
¾12 SLEEP SW
£14
KEY
¾16
NC
¾18 GND
14