Evices; Bios Advanced Menu - TYAN Thunder K8SR User Manual

3.02 – BIOS Advanced Menu
You can select any of the items in the left frame of the screen, such as Super
I/O Configuration, to go to the sub menu for that item. You can display an
Advanced BIOS Setup option by highlighting it using the <Arrow> keys. All
Advanced BIOS Setup options are described in this section. The Advanced BIOS
Setup screen is shown below. The sub menus are described on the following
pages.
BIOS Setup Utility
Main Advanced PCI/PnP Boot
Exit
Advanced Settings
4IDE Configuration
4Floppy Configuration
4Super I/O Configuration
4Hardware Health Configuration
4Event Log Control
4Device & PCI Slots Configuration
4Remote Access Configuration
4USB Configuration
Feature
Menu Item
IDE Configuration
Floppy Configuration Menu Item
Super I/O Configuration Menu Item
Hardware Health
Menu Item
Configuration
Event Log Control Menu Item
Device & PCI Slots
Menu Item
Configuration
Remote Access
Menu Item
Configuration
USB Configuration Menu Item
WWW.TYAN.COM
Security Chipset Power
Use [ENTER], [TAB] or
[SHIFT_TAB] to select a
field
Use [+] or [-] to
configure system time.
+/- Change Field
Tab Select Field
F1 Help
F10 Save and Exit
ESC Exit
Description
Configures devices connected to
AMD8111 IDE controller
Configures devices connected to the
floppy controller
Configures devices connected to the
Super I/O Configuration
Configures & views Hardware
Monitor
Views & controls Event Log
Allows control of integrated devices
& cards plugged into PCI slots
Configures Console Redirect
Configures USB controller & legacy
device support
31
IDE Configuration Sub-Menu
You can use this screen to select options for the IDE Configuration Settings.
Use the up and down <Arrow> keys to select an item. Use the <Plus> and
<Minus> keys to change the value of the selected option.
BIOS Setup Utility
Main Advanced PCI/PnP Boot
Exit
IDE Configuration
Onboard PCI IDE Controller
4Primary IDE Master
4Primary IDE Slave
4Secondary IDE Master
4Secondary IDE Slave
Hard Disk Write Protect
IDE Detect Time Out (Sec)
ATA(PI) 80Pin Cable Detection
WWW.TYAN.COM
Security Chipset Power
Use [ENTER],
[TAB] or
[SHIFT_TAB]
[Both]
to select a field
[xxxx]
Use [+] or [-] to
[xxxx]
configure
[xxxx]
system time.
[xxxx]
[Disable]
+/- Change
[xx]
[Host & Device] Field
Tab Select
Field
F1 Help
F10 Save and
Exit
ESC Exit
32