Digital Tbc/Nr - JVC HR-S7700EU Instructions Manual

Index Search
Your recorder automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
NOTE:
Before starting, make sure the
recorder is in the Stop mode.
Activate Index Search.
w e 2 6
Press or ( or
displayed on the TV screen and search begins in the
corresponding direction.
To access index codes 2 through 9, press
until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press
twice.
To locate the beginning of D from the current position, press
once.
Current position
When the specified index code is located, playback begins
automatically.
Next Function Memory
The Next Function Memory "tells" the recorder what to do after
rewinding. Before continuing, make sure the recorder is in the
Stop mode.
a- For Automatic Start Of Playback
3
Press , then press
b- For Automatic Power Off
3
Press , then press
c- For Automatic Timer Standby
3
Press , then press
2 6
). " 1" or " 1" is
w e
or repeatedly
Index number
4
within 2 seconds.
1
within 2 seconds.
#
(TIMER) within 2 seconds.
Manual Tracking
Your recorder is equipped with automatic tracking control.
During playback, you can override this and adjust the tracking
manually by pressing the PR buttons.
1
Override automatic tracking.
p
Press on the remote control.
2
Adjust the tracking manually.
Press PR + or –.
3
Return to automatic tracking.
p
Press on the remote control.
w
NOTE:
e
When a new tape is inserted, the recorder enters the automatic
tracking mode automatically.

Digital TBC/NR

Your recorder is equipped with the Digital TBC (Time Base
Corrector) that removes jitter from fluctuating video signals to
deliver a stable picture even with old tapes and rental cassettes.
The on/off of Digital 3-DNR (Noise Reduction) which cuts noise
and enables clear picture reproduction is also linked to this
function.
* The default setting is on.
We recommend that you use Digital TBC/NR when...
... playing back a tape recorded on a camcorder.
... playing back a tape repeatedly used.
... using this video recorder as the source player for editing.
Activate Digital TBC/NR.
Press DIGITAL TBC/NR so that the button lights up.
To turn off Digital TBC/NR, press DIGITAL TBC/NR again so
that the light goes off.
NOTES:
If you play back a tape recorded under poor TV reception
condition, the picture may become more stable with Digital
TBC/NR set to off.
When Digital TBC/NR is set to on, if you play back a tape
where certain types of signals are recorded (using a PC or
some character generators), the playback picture may be
distorted. If this is the case, turn off Digital TBC/NR.
When playing back a MESECAM tape, Digital TBC/NR does
not function even though the DIGITAL TBC/NR button is lit.
21
EN