JVC HR-S7700EU Instructions Manual page 16

16
EN
Setting satellite receiver's brand and
channel
After installation, set the satellite receiver's brand and
channel correctly; otherwise, the Satellite Controller
cannot work correctly.
Turn on the TV and select the video channel (or AV
mode).
A
Turn on the satellite receiver.
Turn on the satellite receiver's power.
B
Access the Main Menu screen on the
recorder.
Press MENU.
SAT CONTROL SET (cont.)
C
Access the Initial Set screen.
rt
Press to move the highlight bar (pointer) to "INITIAL
e
SET", then press OK or
D
Access the Sat Control Set screen.
rt
Press to move the
highlight bar (pointer) to
"SAT CONTROL SET", then
e
press OK or .
E
Enter the satellite receiver's brand.
Press the appropriate
NUMBER keys to enter the
brand code from the list on
page 17, then press OK.
If the brand code you entered
is invalid, the code field will
be reset. Enter the correct
brand code again.
If the recorder is in playback or
recording mode, you cannot
set the brand code.
F
Select the satellite receiver's channel for
testing.
Press the appropriate
NUMBER keys to enter one
of the channel positions on
the satellite receiver, then
press OK.
You can select the channel
position between 1 to 999.
After pressing OK, the recorder
enters the Test mode.
.