On-Screen Display; Timer Warning Display - JVC HR-S7700EU Instructions Manual

6
EN

ON-SCREEN DISPLAY

When "O.S.D." is set to "ON" (
A Operation Mode Indicators
B Tape Speed SP/LP/EP
* EP is for NTSC playback only.
C Tape Direction
D Counter Display
E Tape Remaining Time Indicator
F Audio Mode Display
G Tape Position Indicator
The tape position indicator
appears on the TV screen
3
when you press or
5
from the Stop mode
or perform an Index Search
( pg. 21). The position of
q
" " in relation to "0"
(beginning) or "+" (end)
shows you where you are
on the tape.
NOTE:
Depending on the type of tape being used, the tape position
indicator may not appear correctly.
pg. 49), various operational indicators appear on the TV screen.
pg. 25
pg. 22
Beginning
H Type of Broadcast
I Current Day/Month/Year
J Clock Display
K Channel Position Number and Station Name/
Auxiliary Input Indicator (L-1, L-2, F-1, S-1 or
SAT*)
* When "L-2 SELECT" is set to "SAT" (
instead of "L-2".
L Timer Warning Display
A warning appears on the TV screen to tell you that the timer-
recording is to start in 5 minutes if you're not in the Timer
mode at that time. The warning blinks for the entire 5
minutes leading up to the start of timer recording. To clear
the display, press
M "Cassette Loaded" Mark
End
INDEX (cont.)
pg. 26
pg. 37), "SAT" appears
&
on the remote control.