Table of Contents
Advertisement
Digital R
3
(VHS deck only)
3
Digital R
picture system applies edge correction to the luminance
signal to enhance detail.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS VHS MODE SET
SCREEN
2
Move the highlight bar (arrow) to "VHS MODE SET" by
pressing %fi, then press OK or
SELECT DIGITAL R3 SET
MODE
3
Move the highlight bar
(arrow) to "DIGITAL R3" by
pressing %fi, then press
#
OK or
to set to "ON".
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
Normally it is recommended to keep "DIGITAL R3" set to
"ON".
Depending on the type of tape being used, picture quality
may be better with "DIGITAL R3" set to "OFF".
If you use this VCR as the player for editing, be sure to set
"DIGITAL R3" to "OFF" before starting.
#
.
VHS MODE SET
S-VHS MODE
OFF
VIDEO CALIBRATION
ON
PICTURE CONTROL
AUTO
FRONT AUX INPUT
VIDEO
AUTO SP=EP TIMER
OFF
BLUE BACK
ON
= NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
PREVIOUS PAGE
DIGITAL TBC/NR
OFF
=VIDEO STABILIZER
ON
=DIGITAL R3
ON
AUDIO MONITOR
HI-FI
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
Digital TBC/NR
Your VCR is equipped with the Digital TBC (Time Base
Corrector) that removes jitter from fluctuating video signals to
deliver a stable picture even with old tapes and rental cassettes.
The on/off of Digital 3-DNR (Noise Reduction) which cuts noise
and enables clear picture reproduction is also linked to this
function.
* The default setting is "ON".
We recommend that you use the Digital TBC feature when...
... playing back a tape recorded on a camcorder.
... playing back a tape repeatedly used.
... using this VCR as the player for editing.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS VHS MODE SET
SCREEN
2
Move the highlight bar (arrow) to "VHS MODE SET" by
pressing %fi, then press OK or
SELECT DIGITAL TBC/NR
SET MODE
3
Move the highlight bar (arrow) to "DIGITAL TBC/NR" by
pressing %fi, then press OK or
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
If you play back a tape recorded under poor TV reception
condition, there may be cases where the picture becomes
more stable with Digital TBC/NR set to off.
When Digital TBC/NR is set to on, if you play back a tape
where certain types of signals are recorded (using a PC or
some character generators), the playback picture may be
distorted. If this is the case, turn off Digital TBC/NR.
Digital TBC/NR and Video Stabilizer (
used at the same time; if you turn on Digital TBC/NR when
"VIDEO STABILIZER" is set to "ON", Video Stabilizer will be
automatically turned "OFF". Make sure Digital TBC/NR is off
when you want to use Video Stabilizer.
31
EN
(VHS deck only)
#
.
#
to set to "ON".
pg. 30) cannot be
Advertisement
Table of Contents
