Locating Beginning Of Timer Recordings; Instant Review; Adjusting Picture Condition; Digital Tbc/Nr - JVC SR-V10U Instructions Manual

18
EN
I
POWER
REC LINK
S VIDEO VIDEO (MONO)L—AUDIO—R

DIGITAL TBC/NR

H
1
4
7
1
REW ( 1 )
Other Useful functions for playback
Playback Resume Function
If there is a power outage during normal playback (or
Series Playback), the playback will resume automatically
when the power is restored to the VCR. (No setting is
required for this function.)
Video Calibration (
When this function is set to "ON", this VCR checks the
condition of the tape in use during playback and
recording, and compensates to provide the highest-
possible pictures.
Picture Control ( pg. 38)
This function helps you to adjust the playback picture
quality according to your preference.
Video Stabilizer ( pg. 39)
You can automatically correct vertical vibrations in the
picture when playing back unstable recordings made on
another VCR.
REW
PLAY
–
A.DUB
24HR QUICK
PROGRAM
SP EP
INSERT
VCR
2 3
2
5 6
8 9
0
4
FF ( ¡ )
pg. 38)
BASIC PLAYBACK AND RECORDING (cont.)
Locating beginning of timer
H
recordings
At the press of a button, you can turn on the VCR,
rewind the tape and begin to view the most recent timer-
FF
recorded program.
+
CH– /+
PUSH / TURN
After ensuring that the VCR is turned off and that the
timer mode is disengaged, press REVIEW.
REC PAUSE STOP/EJECT
The VCR turns on, and rewinds to the index code
indicating the beginning of the last timer-recorded
program, then begins playback automatically.
You can access a program of 2 to 9 index codes away
from the current position on the tape. If, for example,
you have 5 programs recorded and you want to watch
the third one, press REVIEW three times.
If you want to find the very beginning of the desired program,
press REW ( 1 ) or FF ( ¡ ) after playback starts.
If the tape is already rewound when REVIEW is
pressed, it will play the tape from the beginning. It will
not fast-forward to an index code.
The Instant Review function will also operate if the
VCR is turned on.

Adjusting picture condition

I
— Digital TBC/NR
The Digital TBC/NR (Time Base Corrector / Noise
Reduction) function removes jitter from fluctuating video
signals to deliver a stable picture even with old tapes
and rental tapes. The Digital 3-DNR (Noise Reduction)
function which cuts noise and reproduces clear pictures
is also linked to this function.
We recommend that you use the Digital TBC/NR
function when...
— playing back a tape recorded on a camcorder.
— playing back a tape repeatedly used.
— using this VCR as the player for editing.
Press DIGITAL TBC/NR on the front panel so that the
DIGITAL TBC/NR lamp lights up.
Each time you press the button, this function turns on
and off.
NOTES:
If you play back a tape recorded under poor TV reception
condition, the picture may happen to become more stable
with Digital TBC/NR activated.
If you play back a tape on which certain types of signals
(using a PC or some character generators) have been recorded
with Digital TBC/NR activated, the playback picture may be
distorted. In this case, deactivate Digital TBC/NR.
Digital TBC/NR and Video Stabilizer (
used at the same time; if you turn on Digital TBC/NR when
"VIDEO STABILIZER" is set to "ON", Video Stabilizer will be
automatically turned "OFF". Make sure Digital TBC/NR is
deactivated when you want to use Video Stabilizer.

— Instant Review

pg. 39) cannot be