Table of Contents
Advertisement
Now available to purchase from www.M2Cshop.com
Dial Mode Setting
In the UK, all telephone exchanges now use Tone dialling. The
dial mode setting is pre-set to Tone.
If your telephone does not dial out, it is probably being used from
an older private switchboard (PBX). In this case, the dial mode
must be changed to Pulse.
Press
Use
and
Use
and
Use
and
Press
return to standby or wait 30 seconds
Now available to purchase from www.M2Cshop.com
BASE SETTINGS
(left side) to activate the menu
to scroll through the menu to select
'BS SETTING'
Press
(left side) to confirm
to scroll through the menu to select
'DIAL MODE'
Press
(left side) to confirm
to scroll through the menu to select
'TONE'or 'PULSE'.
(left side) to confirm. Either press
31
to
Advertisement
Table of Contents
