Table of Contents
Advertisement
Note: The screen is disrupted momentarily
when adjusting the PC settings. This is not a
sign of malfunction.
5
Press ~ to select
On.
When the control panel
is locked and any button on the control panel
(except
POWER)
is pressed, the message "NOT
AVAILABLE" appears.
To unlock the control panel:
Select
Off
in step 5 above, or press and hold the
VOLUME -
button on the TV control panel for about
10 seconds until the volume icon appears.
Mode
Horizontal
Position
Vertical
Position
Description
Moves the picture left/right.
The adjustment range is within ±50 from
center.
*
Moves the picture up/down.
The adjustment range is within ± I0 from
center.
*
To set the PC Audio:
Setting the PC Audio
*
The default settings may vary depending on
the input signal format.
Helps to reduce noise and minimize
periodic vertical stripes on the screen.
The adjustment range is within ±IO from
center.
*
Highlight this item then press
8
to get an optimum adjustment
automatically.
Helps to reduce noise and sharpen the
picture.
The adjustment range is within ± 16 from
center.
*
Auto
Adjust
Sampling
Clock
Clock
Phase
Note: Because the PC and HOMI-1 inputs
share the same set of analog audio inputs,
(continued)
This function allows you
to
output or mute the sound
from your PC when connecting using the PC IN
terminal and an analog RGB cable.
(I@'
page 18)
1
MENU
Press
0
and open the
Sound
menu.
2
Highlight
Audio Setup
and press
8.
3
Press. or ... to select
PC Audio
and then press
.... or
~
to select
No
or
Yes.
Yes:
When viewing the PC input, the audio from
the PC Audio input can be heard.
No:
When viewing the PC input, there will be no
audio.
Note: If a PC is not connected
or
there is no
pc input signal, this feature will be grayed
out in the Setup menu.
4
Press. or ... to highlight the item you want to
adjust.
5
Press .... or ~ to make the appropriate
adjustments.
You can view an image from a PC on the TV screen.
When a PC is connected to the TV's PC IN
terminal, you can use the PC Settings feature to
make adjustments to the image. If the edges of the
picture are cut off. readjust the
Horizontal Position
and
Vertical Position.
If the picture is affected by
interference, readjust the
Clock Phase
and
Sampling
Clock.
To adjust the PC settings:
1
Repeatedly press ~ to select PC input mode
(I@'
"Selecting the video input source to view"
page 28).
2
MENU
Press
0
and open the
Setup
menu.
3
Highlight
PC Settings
and press
8.
Using the PC settings feature
43
I
Advertisement
Table of Contents
