Using Cablecleaf" Digital Noise Reduction; Using Mpeg Noise Reduction; Using The Game Mode Feature - Toshiba 19SL400U Owner's Manual

Using CableClear® digital noise
reduction
The CableClear" digit.al noise reduct.ion feature
allows you to reduce visible interference in your
TV picture. This may he useful when receiving a
broadcast with a weak signal (especially a Cable
channel) or playing a noisy video cassette or disc.
To change the CableClear settings:
1
MENU . . .
Press
0
and open the
Picture
menu. highlIght
Noise Reduction
and press
8.
2
In the
CableClear
field, select your desired setting.
Note.
• If the current input is ANT/CABLE,
VIOEO, the menu will display the text
"CableClear. " The available selections are
Off, Low, Middle, and High
• If the current input is ColorStream HO,
HOMI 1 or HOMI 2, the menu will display
the text "DNA. " The available selections
are Off, Low, Middle, and High Low,
Middle, and High will reduce the noise in
varying degrees, from lowest to highest,
respectively
3
To save the new settings, highlight
Done
and
press
8.
To revert to the factory defaults. highlight
Reset
and press@.
Using MPEG noise reduction
The MPEG noise reduction feature allows you
to reduce visible interference caused by MPEG
compression. Choices for MPEG noise reduction
are
Off, Low, Middle,
and
High. Off
is automatically
selected when this feature is disabled ("grayed out").
To select the MPEG noise reduction level:
1
MENU .
Press
0
and open the
Picture
menu.
2
Highlight
Noise Reduction
and press
@.
3
Press .... or
'Y
to highlight the
MPEG Noise
Reduction
field, and then press
~
or
~
to select
either
Off, Low, Middle
or
High.
4
To save the new settings, highlight
Done
and
press@.
To revert to the factory defaults, highlight
Reset
and press
8.
I
52
Using the Game Mode feature
You can use the Game Mode feature for shorter
frame delays when playing a video game requiring:
split-second timing between the on-screen display
and input from the controller (such as music creation
and high-action games).
This feature is more elfective for 4S0i and IOXOi input
signals.
Note: To use the Game Mode feature,
the current video input must be Video,
ColorStream HO, HOMI 1 or HOMI
2.
The
Game Mode cannot be turned on when any
other video input is selected.
To turn on Game Mode:
1
MENU
d h
P'
t . .
Press
0
an open
I.
e
IC
ure
menu hIghlIght
the
Game Mode.
2
Press
~
or
~
to select
On.
To turn off Game Mode:
Select
Off
in step 2 above. change the video input. or
turn the TV off and then on again.
Note: You can change the video input by
pressing
~
on the remote control
(1&' page 28).