Table of Contents
Advertisement
Using the advanced picture
settings features
Using Dynamic Contrast
Selecting the color temperature
You can change the quality of the picture by selecting
from three preset color temperatures (Cool, Medium,
and Warm), as described below.
(continued)
Note: If you select one of the factory-set
picture modes (Sports, Standard, Movie, or
PC) and then change the color temperature
mode, the picture mode automatically
changes to Preference.
To select the color temperature:
1
MENU
•
Press 0
and open the
Picture
menu.
2
Highlight
Picture Settings
and press
8.
3
Highlight
Advanced Picture Settings
and press
8.
4
Highlight
Color Temperature
and press
8.
5
In the
Color Temperature
field, press .... or ~ to select
the mode you prefer
(COOl, Medium,
or
Warm).
6
Press£. or
T to select either B
Drive
or
GDrive,
and then press .... or
~
to adjust the settings.
• B Drive:
~
makes the picture blueish.
• G Drive:
~
makes the picture greenish.
Note: The B Drive and
G
Drive settings
are connected to the Color Temperature
settings and will change based on which
setting is selected in step 5 above.
7
To save the new settings, highlight
Done
and press
8.
To revert to the factory defaults, highlight
Reset
and
press
8.
neutral
reddish
blueish
Picture Quality
Medium
Warm
Cool
Mode
To adjust
tllu~
static gamma settings:
The static gamma feature allows you to adjust the
levels of black in the picture.
2
Highlight
Advanced Picture Settings
and press
8.
3
Press£. or T to select
Dynamic Contrast.
4
Press .... or ~ to select
High, Middle, Low
and
Off.
Using the static gamma feature
1
MENU
•
Press 0
and open the
Picture
menu.
2
Highlight
Picture Settings
and press
8.
3
Highlight
Advanced Picture Settings
and press
8.
• In the
~)tatic
Gamma
field, press .... or
~
to
adjust the static gamma.
The adjustment range is within ±5 from center.
• If the setting is moved in the minus direction,
the detail of black colors will be decreased.
• If the setting is moved in the plus direction, the
detail of black colors will be increased.
4
To save the new settings, highlight
Done
and
press
8.
To revert the factory defaults, highlight
Reset
and press
@~.
Note: If you select one of the factory-set
picture modes (Sports, Standard, Movie
or PC) anci then change the static gamma
setting, the picture mode automatically
changes: to Preference.
Dynamic Contrast detects changes in picture quality
that affect the appearance of your contrast settings
and then automatically adjusts the video.
To select D:ynamic Contrast preference:
1
From the the
Picture
menu, highlight
Picture
Settings
and press
8.
51
I
Advertisement
Table of Contents
