Glass Frame Removal and Installation
Warning:
The appliance must be completely cool before removing the glass.
Warning:
Do not strike or slam the glass.
Depending on the face being used, either:
a
1) Swing the access door down and remove the top grill, or
2) Remove the face by unscrewing it or lifting it off -- see
the instructions included with the face for details.
Open the 4 latches holding the glass frame in place,
starting with the bottom. Follow the instructions shown to the right.
Lift the glass frame up and
b
pull it forward to remove.
Re-Attaching the Glass Frame:
1) Hang the glass frame on the firebox.
2) While holding the frame in place, attach the upper latches
(follow the instructions to the right in reverse).
3) Lift the glass frame slightly and attach the lower latches.
NOTE: Make sure the glass frame is fully in place -- it should
be flush with the front of the fireplace when installed correctly.
© Travis Industries
Installation
(
NOTE:
You may need to lift
the glass frame
while re-attaching.
for qualified installers only)
Latch
Catch on
glass frame
4110505
39
Top of
Firebox
Glass
100-01263_000