Removing Gasket-Door - Samsung FTQ353IWUB Service Manual

3. Disassembly and Reassembly

3-1 Removing Gasket-Door

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range . Replace all panels before operating range . Failure to do so
can result in death or electrical shock .
PRECAUTION
When you work on the electric range, be careful when handling the sheet metal parts . Sharp edges may
be present, and you can cut yourself if you are not careful .
Parts
Gasket door
1. Open the oven door to its fully down position .
. Pull the ends of the gasket out of the liner holes .
3. Pull the oven door gasket clips out of the holes until all of the clips are removed .
REASSEMBLY NOTE: When you install the new gasket, make sure that all of the clips are
seated in their liner holes, and that the ends of the gasket are pushed fully into their holes . Use
the pointed end of a pencil to push the gasket ends into the holes .
Explaination Photo
Explaination
6