3. Disassembly and Reassembly
3- Removing Regulator-Energy
WARNING
Disconnect power before servicing the range Replace all panels before operating range . Failure to do so
can result in dearh or electrical shock .
PRECAUTION
When you work on the electric range, be careful when handling the sheet metal parts . Sharp edges may
be present, and you can cut yourself if you are not careful .
Parts
Regulator-
Energy
Explaination Photo
2 Screws
1
Explaination
1.
Turn off the electrical supply going
to the range .
. Pull the range away from the wall
so that you can access the rear
panel .
3. Remove Cover-Back Guard Wire
(See step 4 on page 11)
4.
Remove Regulator-Energy
connectors which be replaced .
5. Pull out the Knob-Dial .
6.
Remove 2 screws and replace
Regulator-Energy .