Specifications - JVC HR-J73MS Instructions Manual

Troubleshooting (cont'd)
OTHERS
Symptoms
Sound noise is heard during NICAM signal receiving.
(There is no NICAM tuner in this VCR.)
Whistling or howling is heard from TV during camera
recording.
Channel cannot be switched.
Remote control does not function.
Index Search does not function properly.

Specifications

GENERAL
Power requirement ............. AC110 – 240~, 50/60 Hz
Power consumption ........... 24 W
Temperature
Operating ......................... 5 C to 40 C
Storage ............................ –20 C to 60 C
Dimensions (W H D) .... 435
Weight ................................ 4.9 kg
Format ................................ VHS standard
Maximum recording time
SP .................................... 240 min. with E-240 video cassette
LP .................................... 480 min. with E-240 video cassette
EP .................................... 480 min. with T-160 video cassette
VIDEO
Signal system ..................... PAL-type colour signal and CCIR
Recording/Playback
system ................................ DA-4 (Double Azimoth) head
Signal-to-noise ratio ........... 43 dB
Horizontal resolution .......... 240 lines (PAL/MESECAM)
Input ................................... 0.5 – 2.0 Vp-p
Output ................................ 1.0 Vp-p
28
L Press the Pause/Still 8 8 8 8 8 button more than two seconds
L Move camcorder or camera's microphone away from TV or reduce TV
L Is recording in progress?
L Are the batteries discharged?
L Adjacent index codes may be too close to each other.
105 351 (mm)
(PAL/MESECAM)
160 min. with T-160 video cassette
(NTSC)
(PAL/MESECAM)
(NTSC)
monochrome signal,
625 lines/50 field
NTSC colour and EIA monochrome
signals, 525 lines/60 fields
herical scan system
220 lines (NTSC)
Check point
in accordance with step 5 of FINE TUNING.
( p.10 Fine-tuning channels already stored.)
– NICAM SUPPRESSION function works after "*"
indication.
– Press the STORE button.
sound volume.
– Press the Pause/Still 8 8 8 8 8 button, change the channel, and press the
Play - - - button. - -
– Replace with new ones.
– Erase some index codes and mark new ones if necessary, with
sufficient distance between any two index codes.
AUDIO
Frequency range ................ 70 Hz to 10,000 Hz (Normal)
Input ................................... –8 dBs
Output ................................ –6 dBs
MIC Input ........................... –56 dBs
TUNER/TIMER
TV channel storage
capacity .............................. 48 positions (+ AUX position "AU")
Channel coverage .............. VHF Low 42 – 153 MHz
Aerial output ....................... UHF channels 24 – 27/
Programme capacity .......... 1-year/8-programme timer
Memory backup time .......... 18 hours
ACCESSORIES
Provided accessories
Aerial cable ......................................................................... 1
Infrared remote control unit ................................................. 1
"AA/UM-3" battery ............................................................... 4
"AAA/UM-4" battery ............................................................ 2
Conversion plug .................................................................. 1
Wireless microphone .......................................................... 1
Wired/Wireless microphone ................................................ 1
Specifications shown are for SP mode unless otherwise
specified.
Design and specifications subject to change without notice.
TV PROG. 1 *
[STORE] : STORE
[TV PROG ] : FINE TUNING+
[TV PROG ] : FINE TUNING-
[CH SET] : EXIT
20 Hz to 20,000 Hz (Hi-Fi)
CH 1 – 5 (China, Russia)
High 153 – 300 MHz
CH 6 – 12 (China, Russia)
HYPER 300 – 470 MHz
UHF 470 – 870 MHz
CH 13 – 57 (China, Russia)
CH 21 – 69 (U.K.)
(E32 – E40) (adjustable)