Timer Recording - JVC HR-J73MS Instructions Manual

Timer Recording

Before performing the following steps:
L Insert a cassette with the safety tab in place. The recorder will
come on automatically.
L Turn on the TV and select the VIDEO channel (or AV mode).
L Select the appropriate colour system by pressing the
COLOUR SYSTEM button. (
COLOUR SYSTEM button
REC SEARCH MIC WIRELESS
SYSTEM 1/2 MIC
OPERATE
COLOUR
SP/LP/EP SYSTEM CH SET
TIMER
SINGING AND AUDIO
BLANK WIRELESS
RECORDING MONITOR
SEARCH MIC
SYSTEM
1 MIC 2 WIDE
QUALITY
PROG. button
NUMBER buttons
SP/LP/EP button
CANCEL button
1 Press PROG. button to access mode select screen.
2
Press TV PROG. 8 8 8 8 8 /9 9 9 9 9 button to
place the pointer next to "TIMER
PROGRAMMING", then press OK
button.
3
Press NUMBER button "1 (8 8 8 8 8 )" or
"4 (9 9 9 9 9 )" to enter the time you want
recording to start.
L Press and hold either button to delay
or advance the time by 30 minutes.
L If the Programme is already used,
press PROG. buttton until a vacant
Programming screen appears.
4
Press NUMBER button "2 (8 8 8 8 8 )" or
"5 (9 9 9 9 9 )" to enter the time you want
recording to stop.
L Press and hold either button to delay
or advance the time by 30 minutes.
5 Press NUMBER button "3 (8 8 8 8 8 )" or "6 (9 9 9 9 9 )" to enter the
date.
16
p.25)
OK MIC
VOLUME
ECHO
TV PROG.
STORE
KEY CONTROL
ECHO
TV PROG.
AUTO SP/LP
TIMER
DAILY button
WEEKLY button
TIMER button
TV PROG. button
TIMER PROGRAMMING
CLOCK SET
[TV PROG ]
OK
[CANCEL] : EXIT
-P1-
START STOP
21 : 00 -- : --
SP
DATE TV PROG.
25 : 12 --
[1-6] [TV PROG ]
[PROG/CLOCK] : NEXT
-P1-
START STOP
21 : 00 22 : 00
SP
DATE TV PROG.
25 : 12 --
[1-6] [TV PROG ]
[PROG/CLOCK] : NEXT
Press TV PROG. 8 8 8 8 8 /9 9 9 9 9 button to
6
select the channel you wish to
record.
7 Press SP/LP/EP 7 7 7 7 7 / J J J J J button to set the tape speed.
L For each additional programme, press PROG. and repeat
steps 3 to 7.
8
Press PROG. button as many times as necessary to
return to normal screen.
9
Press TIMER button to engage recorder's timer mode.
L To Timer-Record Weekly Or Daily Serials...
...anytime during steps 3 through 7, press WEEKLY
(NUMBER button "9") for weekly serials or DAILY (NUMBER
button "8") for daily serials (Monday to Friday).
Notes:
You can programme this recorder to timer-record as many as
8 programmes. To record the extra programme, you must
first cancel any unnecessary programmes. (
Cancel Programmes p.17)
For safety, your recorder disables all other functions while in
the Timer mode. If you want to use the recorder but its Timer
mode is engaged, press TIMER button and all other functions
are operable. To re-engage the timer, press TIMER button.
In case of a power failure after programming, the recorder's
memory backup keeps your selections for 18 hours.
Backup time becomes shorter as the unit's internal parts
becomes old. When this occurs, please consult your nearby
JVC dealer.
-P1-
START STOP
21 : 00 22 : 00
SP
DATE TV PROG.
25 : 12 1
[1-6] [TV PROG ]
[PROG/CLOCK] : NEXT
Check And