Editing - JVC HR-J73MS Instructions Manual

Editing

Editing to/from another recorder
Player
Audio/Video signals
Recorder
VIDEO CHANNEL
Preparation
Connect the player's AUDIO and VIDEO OUT connectors to the
recorder's AUDIO and VIDEO IN connectors.
1
Select the recorder's external input mode.
L With this video recorder, press NUMBER button "0".
"AU" will appear instead of a channel number.
2
Put the player in the Play mode.
3
Put the recorder in the Recorder mode.
Note:
When you dub an NTSC tape using your recorder as the
playback deck, select MANUAL NTSC (or 4.43) with the
COLOUR SYSTEM button. (
24
TV
Receiver
p.25)
Editing from a camcorder
Recorder
Editing Cable
AUDIO OUT
Player
EDIT
Camcorder
Preparation
Connect the camcorder's AUDIO and VIDEO OUT connectors
to the recorder's AUDIO and VIDEO IN connectors.
1 Select the recorder's external input mode by pressing
NUMBER button "0". "AU" will appear instead of a
channel number.
2
Put the camcorder in the Play mode.
3
Put the recorder in the Record mode.
IMPORTANT:
L To edit, both the player and the recorder must be of the
same colour system. Press your recorder's COLOUR
SYSTEM button to select the appropriate colour system.
L PAL, SECAM and NTSC camcorders can be used as a
player for editing.
L For more information on multi-system compatibility.
( p.25)
L If the camcorder is equipped with the Master Edit Control
system, you can control the recorder using the
camcoder's controls. See the camcoder's instruction
manual for operating procedure.
Audio/Video signals
VIDEO OUT