Installation And Surveillance Area - Kompernass BA 105 A1 Operating Instructions Manual

Installation and surveillance area

GB
You can fi x the motion detector to a wall using the wall bracket
CY
the motion detector can also be placed on a solid, level surface. The optimum
installation location is 2 m above the ground at a 15° angle. In order to guarantee
optimum motion detection, the motion detector must be located so that the object
to be detected is not moving towards the detector itself but moves across its fi eld
of view from left to right or vice versa.
CAUTION
► When selecting a position for the motion detector, ensure that it is not
subjected to direct sunlight, vibrations, moisture, dust, heat or cold.
Otherwise, incorrect triggering or functional impairments can result.
♦ Using the wall bracket
holes on the wall.
♦ Drill two holes (ø 6 mm) and insert the wall plugs supplied.
DANGER
► When drilling, ensure that you do not inadvertently damage power, gas
or water lines. There is a risk of fatal injury!
♦ Screw the wall bracket
8
as a template, mark the positions for the drill
to the wall using the supplied screws.
. Otherwise,
BA 105 A1