Initial Operation; Inserting/Replacing The Batteries - Kompernass BA 105 A1 Operating Instructions Manual

Initial operation

Inserting/replacing the batteries

Motion detector:
♦ Open the battery compartment
the cover in the direction of the arrow.
♦ Insert 4 batteries of type AA in the battery compartment
correct polarity!). The siren
♦ Close the battery compartment
Remote control:
NOTE
► The batteries supplied (Type LR44) are already inserted in the remote
control when delivered. Before use, remove the insulating strip on the rear
of the remote control.
To insert new batteries proceed as follows:
♦ Undo the screws on the rear of the remote control and open the housing.
♦ Place the 3 batteries of type LR44 in the battery compartment
(observe the correct polarity!).
♦ Screw the remote control back together.
BA 105 A1
on the rear of the device by pushing
will make a brief signal sound.
again.
(observe the
7
GB
CY