Toshiba RAS-10SK-E x2 Service Manual page 19

CAUTION
• Exposure of unit or water or other moisture before installation will result in an electrical short.
Do not store in a wet basement or expose to rain or water.
• After unpacking the unit, examine it carefully for possible damage.
• Do not install in a place that can increase the vibration of the unit. Do not install in a place that can amplify
the noise level of the unit or where noise and discharged air might disturb user's neighbors.
• To avoid personal injury, be careful when handling parts with sharp edges.
• Please read the installation manual carefully before installing the unit. It contains further important instruc-
tions for proper installation.
With regard to Schedule 3, Item 7 of the above UK Regulations, this appliance must be permanently con-
nected to the fixed wiring of the main electrical supply by means other than the use of an approved 13 Amp
plug-top as outlined in the Regulations.
Electrical work must be carried by suitably qualified persons and in accordance with all relevant safety stan-
dards and codes of practice.
We recommend that the power supply for this appliance is derived from a suitably protected dedicated circuit.
UK Plugs and Sockets etc (Safety) Regulations 1994
SI Number 1768
– 19 –
(for U.K. only)