Toshiba RAS-10SAV Series Installation Manual
Hide thumbs Also See for RAS-10SAV Series:

Advertisement

Quick Links

AIR CONDITIONER
RAS-10SKV Series
Indoor Unit
Toshiba 1108651069 (COVER)
3
INSTALLATION MANUAL
(SPLIT TYPE)
RAS-10SAV Series
Outdoor Unit
2/20/07, 9:55 AM
Toshiba 1108651069 (COVER)

Advertisement

Table of Contents
loading

Summary of Contents for Toshiba RAS-10SAV Series

  • Page 1 INSTALLATION MANUAL AIR CONDITIONER (SPLIT TYPE) RAS-10SKV Series RAS-10SAV Series Indoor Unit Outdoor Unit Toshiba 1108651069 (COVER) 2/20/07, 9:55 AM Toshiba 1108651069 (COVER)
  • Page 2: Table Of Contents

    • Test Operation ..............9 • Wiring Connection ............. 4 • Auto Restart Setting ............9 • Piping and Drain Hose Installation ........5 • Indoor Unit Fixing .............. 6 • Drainage ................6 Toshiba 1108651069 (TOC) 2/20/07, 9:56 AM Toshiba 1108651069 (TOC)
  • Page 3: Precautions For Safety

    Also, make sure the equipment is properly earthed. • Appliance shall be installed in accordance with national wiring regulations. If you detect any damage, do not install the unit. Contact your TOSHIBA dealer immediately. CAUTION • Exposure of unit to water or other moisture before installation could result in electric shock.
  • Page 4: Installation Diagram Of Indoor And Outdoor Units

    ! to the bottom Gas side plate of the outdoor unit before Pipe insulating material installing it. Air outlet Drain outlet (polyethylene foam, 6 mm thick) Putty, PVC tapes each Toshiba 1108651069 (01_EN) 2/20/07, 9:54 AM Toshiba 1108651069 (EN)
  • Page 5: Indoor Unit

    (A), drill the pipe hole (∅65 mm) at a slight downward slant to the outdoor side. NOTE • When drilling a wall that contains a metal lath, wire lath or metal plate, be sure to use a pipe hole brim ring sold separately. Toshiba 1108651069 (01_EN) 2/20/07, 9:54 AM Toshiba 1108651069 (EN)
  • Page 6: Electrical Work

    • Wire type : H07RN-F or more How to install the air inlet grille on the indoor unit • When attaching the air inlet grille, the contrary of the removed operation is performed. Toshiba 1108651069 (01_EN) 2/20/07, 9:54 AM Toshiba 1108651069 (EN)
  • Page 7: Piping And Drain Hose Installation

    (Use polyethylene foam as insulating material.) Firmly insert the drain hose and drain cap; otherwise, water may • When bending a pipe, carefully do it, not to crush it. leak. Toshiba 1108651069 (01_EN) 2/20/07, 9:54 AM Toshiba 1108651069 (EN)
  • Page 8: Indoor Unit Fixing

    • A place where high-frequency waves are likely to be • A place where the drain water does not raise any problems generated as from audio equipment, welders, and medical equipment Strong wind Toshiba 1108651069 (01_EN) 2/20/07, 9:54 AM Toshiba 1108651069 (EN)
  • Page 9: Refrigerant Piping Connection

    2. How to fit position of the pipes Incused line Put the edges of the pipes to the place with a distance of 85 mm from the incused line. Toshiba 1108651069 (01_EN) 2/20/07, 9:54 AM Toshiba 1108651069 (EN)
  • Page 10: Wiring Connection

    Check places for the outdoor unit. • Check the flare nut connections for the gas leak with a gas leak detector or soap water. Toshiba 1108651069 (01_EN) 2/20/07, 9:54 AM Toshiba 1108651069 (EN)
  • Page 11: Test Operation

    Auto Restart has been selected. • To cancel the Auto Restart, follow the steps described in the TIMER section Auto Restart Function of the owner’s manual. SLEEP ● ● ● FILTER CLOCK Toshiba 1108651069 (01_EN) 2/20/07, 9:54 AM Toshiba 1108651069 (EN)
  • Page 12 1108651069 Toshiba 1108651069 (COVER) 2/20/07, 9:55 AM Toshiba 1108651069 (COVER)

This manual is also suitable for:

Ras-10skv series

Table of Contents