Manual Channel Setup - JVC HR-J580EK Instructions Manual

44
advanced features

Manual Channel Setup

get to the confirmation screen
highlight bar to
and press O (or E).
select position
PR CH
01 26
02 33
03 23
04 30
05 37
06
07
[10]
a k: EDIT
a [x]: DELETE
[MENU]: EXIT
ing. Use the number keys to enter the Channel Number that you want to store.
input channel id
and B buttons to select the required ID from the stored list.
fine tuning
B buttons to fine-tune the channel. A '+' or a '–' symbol will appear during this process.
save new channel details
mation Screen will appear again. Repeat the above procedure from
many times as required.
close confirmation screen
using the A and B buttons
MANUAL CH SET
M
Use the
ID PR CH ID
BBC1 08 - - - -
BBC2 09 - - - -
ITV 10 - - - -
CH4 11 - - - -
CH5 12 - - - -
- - - - 13 - - - -
- - - - 14 - - - -
Press the E button to move to the Channel ID space and use the A
Press the E button to move to the Fine Tuning '+/–' and use the A and
Press O to save the details you have just entered. The Confir-
Press m. Move the
button on the Remote Control to move the highlight bar
to a vacant position then press O.
In this example, we have chosen position 6.
When the
select band
CH SET screen appears, press the
A and B buttons to
change the band between CH
(regular) and CC (cable).
input channel number
the E button and you will see
the channel number space flash-
Press m.
MAIN MENU
MODE SET
AUTO CH SET
F
MANUAL CH SET
INITIAL SET
[1] a k
[MENU]: EXIT
MANUAL
PR CH
06 CH21
[0–9]: SELECT
[0]: CURSOR g
k: OK
[MENU]: EXIT
Press
Select Position
ID FINE
- - - - +/–
onwards as