JVC HR-J580EK Instructions Manual page 27

PROG
1
7
0000
9
4
TV
TV/VCR AUDIO – –:– –
1 2 3
2
4
5 6
VPS/PDC DAILY/QTDN. WEEKLY/HEBDO
7 8 9
AUX 4
0000
0
START STOP
DATE PR
DEBUT FIN
EXPRESS
?
1 PROG 30 SEC
Return to Normal Screen
Press p or O.
about 5 seconds, then the normal TV screen appears. If the timer programme is
overlapped with another one that was already set,
appears on the TV screen. (
Engage Timer Mode
You must now put the VCR into Timer Mode by pressing c otherwise no
recording will take place. c will appear on the display panel. To disengage the
Timer Mode, press c again.
If no video tape is loaded or the safety tab is removed, c, Play indicator (,) and
Record indicator (U) will flash. Insert a tape to record!
– WARNING –
TIMER RECORDING
TO START SOON
f [x]
PROGRAM COMPLETED
pg. 28)
If you have set the VCR to Timer Record a
programme and have not engaged the Timer
Mode, you will see this warning appear on your
screen five minutes before the appointed start
time. To clear the display, press x.
If the VCR is being used as the player
warning
for tape-to-tape dubbing, this warning screen will
be recorded by the other VCR.
basic features
appears on the TV screen for
PROGRAM OVERLAPPED
27