The B.e.s.t. Picture System - JVC HR-J580EK Instructions Manual

about b.e.s.t.
Works in SP and LP
modes
Does not work with
Auto Satellite Prog
Recording
Works before Timer
Recording
B.E.S.T. data is lost
when tape is ejected
Pressing the T button on
VCR does not start Instant
Timer Recording while
B.E.S.T. is turned ON
Recording and Playback Using B.E.S.T.
recording
VCR spends about 7 seconds assessing the condition of the tape and then begins recording.
During B.E.S.T.
playback
based on the condition of the tape in use. B.E.S.T. is active during Auto
Tracking. bESt
Avoiding B.E.S.T. Time Delay
Since B.E.S.T. introduces a 7 second delay before recording starts, you may wish to compensate by
first pressing | and T together (this puts the VCR into
the VCR performs the B.E.S.T. tape assessment) and then pressing . when you wish to start
recording.
The B.E.S.T.
Picture System
The Biconditional Equalised Signal Tracking (B.E.S.T.) System checks the
condition of the tape in use and compensates during recording and playback
to give the best picture quality possible. The default setting is ON.
Turning B.E.S.T. ON or OFF
get to the mode set screen
Move the highlight bar to
A and B buttons and press O (or
E).
select b.e.s.t. mode
B.E.S.T. using the A and B buttons and
press O (or E) to set
return to normal screen
Press and hold T and press . on the Remote Control (or press T on the VCR). The
VCR
a
pause of 7 seconds
REVIEW
Press .. The VCR adjusts the playback picture quality
appears on the VCR's display panel.
Press m.
using the
MODE SET
Move the highlight bar to
or .
B.E.S.T. ON OFF
Press m.
a
B.E.S.T. complete
RECORD PAUSE
advanced features
MODE SET
B.E.S.T. ON
F
PICTURE CONTROL AUTO
AUTO TIMER OFF
O.S.D. ON
DIRECT REC ON
AUTO SP a LP TIMER OFF
POWER SAVE ON
[1] a k
[MENU]: EXIT
VCR
REVIEW
mode during which time
31
VCR
REVIEW