Regular Timer Programming - JVC HR-J449MS Instructions Manual

44
Regular Timer
Programming
Remember, the clock must be set before you can progamme
the timer ( pg. 22).
Before performing the following steps:
Insert a cassette with the safety tab in place. The recorder
will come on automatically.
Turn on the TV and select the AV mode.
1
4
7
DEBUT +/–
PROG.
q
2
2 3
5 6
8 9
0
4
DATE +/–
TIMER RECORDING(cont.)
If you don't know the PlusCode number for the programme you
wish to record, use the following procedure to set your recorder
to timer-record the programme.
ACCESS TIMER
PROGRAMMING SCREEN
1
Press PROG.
ACCESS PROGRAMME
SCREEN
2
Press DEBUT +/–. (If
you're just starting out,
"Program 1" appears.)
The front display panel looks like this:
VN
ENTER PROGRAMME
START TIME
3
Press DEBUT +/– to enter
the time you want
recording to start.
Press and hold DEBUT
+/– to move in 30-
minute increments, or
press and release
repeatedly to move 1
minute at a time.
The front display panel looks like this:
VN
ENTER PROGRAMME STOP
TIME
4
Press FIN +/– to enter the time you want recording to
stop.
ENTER PROGRAMME DATE
5
Press DATE +/–. (The current date appears on screen.
The date you enter appears in its place.)
– P1 –
DEBUT FIN
=
–:– – –:– –
VN M.
DATE CHAINE
25.12 – –
[+/–] =
[MENU] : SORTIE
– P1 –
DEBUT FIN
=
21:00 –:– –
VN M.
DATE CHAINE
25.12 – –
[+/–] =
[MENU] : SORTIE